Kitchen Taps Over £750

Over £750 buys time, not polish. The tap should still feel exactly the way it does today after a decade of daily use, and because everything inside it is built to be serviced rather than swapped out wholesale, a fault years from now is far more likely to mean a repair than a whole new tap. That's the actual case for spending at this level, and whether it's worth it to you depends on how long you plan to keep the kitchen it's going into.

What you get over £750

At this level the body is cast in solid brass rather than zinc alloy, and brass is what lets a finish bond properly and keeps the tap from turning brittle as it ages. The cartridge is ceramic disc, machined to a tolerance you can feel in the handle: it moves with a weighted smoothness rather than a slight looseness, and it still does after years of daily use.

Finishes at this level are applied by processes that bond to the metal instead of sitting on top of it. That's why a tap in this band can carry a living finish such as unlacquered brass or aged bronze, designed to change character as it's used, and why its polished finishes resist the dulling that eventually reaches cheaper plating.

Where the money goes

Four things decide most of the difference: the cartridge, the body material, how the finish is applied, and what the guarantee actually covers. A ceramic disc cartridge in a solid brass body, finished by a process that bonds to the metal, costs considerably more to produce than a pressed cartridge in a zinc body with electroplating over the top, and that's mostly what you're paying for, not the name on the tap.

That production difference is also why a fault behaves so differently between the two. Cartridges for a discontinued mid-range tap become hard to source within a few years, so a straightforward repair turns into buying a whole new tap, while a ceramic disc cartridge in this band is built to be replaced on its own for as long as you own the kitchen. Guarantee length is worth reading rather than assuming from the headline number too, since cover for the working parts and cover for the finish are often different lengths, with finish cover usually the shorter of the two.

Choosing within the range

This tier suits a kitchen you're fitting once and plan to keep for decades, where the tap earns its keep by outlasting several rounds of redecorating around it. If you're fitting out at this level, the matching kitchen sinks over £750 are worth choosing alongside it, since the two coordinate far more easily as a pair than hunting for a match afterwards. To see how this band sits against the rest of what we stock, browse the full kitchen taps range.

Why shop with The Tap Collection

Every order includes free mainland UK delivery and the full manufacturer warranty, and you can spread the cost with Klarna or PayPal Pay in 3 at checkout. Our UK based team is happy to help with finish matching advice and compatibility questions: call 0330 133 2247, email info@thetapcollection.co.uk or send us a message through our contact form. We are open Monday to Friday, 9am to 5pm, and aim to reply within 24 hours on working days.

Frequently Asked Questions

Is it worth buying an expensive kitchen tap?

It depends on how long you intend to keep it. A tap at this level is built to be repaired rather than replaced, with cartridges and seals available years after purchase, so the cost spreads across a much longer life. If you're refitting a kitchen you expect to keep for a decade or more, it usually justifies itself, though for a rental or a short-term fix, it won't.

What makes one kitchen tap cost more than another?

Four things account for most of the difference, the cartridge that controls flow, the metal the body is cast from, how the finish is applied, and how long the maker will stand behind it. A solid brass body with a ceramic disc cartridge and a physically bonded finish costs considerably more to produce than a zinc body with a pressed cartridge and electroplating.

What is a ceramic disc cartridge?

It's the valve inside the tap that controls flow and temperature, made from two polished ceramic discs that slide across each other. Because ceramic is harder than the grit carried in tap water, the seal doesn't wear the way a rubber washer does. It's the single component most responsible for whether a tap still feels precise after years of daily use.

How long should a kitchen tap at this level last?

Properly installed and in normal domestic use, a tap in this band should outlast the kitchen around it. The finish and the cartridge are what decide that, and both are serviceable rather than sacrificial. Water quality matters more than anything else, in very hard water, descaling the aerator occasionally does more for its lifespan than any other habit.

Do more expensive taps come with longer guarantees?

Usually, and the guarantee is worth reading rather than skimming. What matters isn't the headline length but what it covers, some protect the working parts and the finish separately, and finish cover is often shorter. Ask whether replacement cartridges will still be available once the guarantee expires, since that decides whether a fault means a repair or a new tap.

What happens if a part fails once the guarantee has run out?

It depends on whether the maker still stocks parts for that model, which is exactly why cartridge and seal availability matters more at this level than the guarantee length itself. A tap built to this standard is designed to be serviced for as long as you own it, so a worn cartridge or a stiff handle years down the line usually means fitting a replacement part rather than buying an entirely new tap.

Do you offer free delivery?

Yes, we offer free mainland UK delivery on all orders.

Orders are processed within 24 hours (Monday to Friday) and typically arrive within 1–4 business days. Please note that offshore regions and the Scottish Highlands may incur additional charges.

Do you offer finance or payment plans?

Yes, we do, we offer Klarna and PayPal Pay in 3 at checkout, allowing you to split your purchase into three interest-free payments with no fees, subject to approval.

Do you offer bulk or wholesale orders?

Yes, we can accommodate bulk and wholesale orders for selected products and projects.

If you’re purchasing multiple items for a trade, commercial, renovation or development project, please request a quote with the products and quantities you require.

Depending on the order size and brand, we may be able to offer tailored pricing, lead-time information and product recommendations.